Most shower faucet problems are related to the installation. Often, homeowners will handle shower faucet installation as a DIY project. But if not done correctly, it can damage some parts or result in an incorrect installation. In that case, you’ll experience leaking, water pressure, and faucet damage issues. Here are five common colonne de douche avec robinet and how to fix them.
#1. Leaking or Dripping Faucet
It is a common problem that any household can encounter daily. Fortunately, it is among the easiest to fix. But sadly, other than the annoyance the drip causes, leaking can also waste a lot of water. Plus, it poses a safety danger, which forces you to incur expensive utility costs from water consumption that you didn’t even use.
A leaky faucet is mostly caused by a damaged washer inside. Change the washer and see if it fixes the problem. Also, try to tighten your shower valve to solve this issue.
#2. Low Water Pressure
Like leaking, low water pressure is also a common problem with shower faucets. The problem could be caused by a poor construction of your house’s main water pipe, your water filter, or other factors unrelated to the faucet.
It also could be that your faucet is clogged with rubbish from a dirt water pipe. Thankfully, it’s a simple DIY project to fix. Take a soft brush and brush the holes of the faucet to remove dirt. If you can, remove it and clean the holes thoroughly. If an error in your plumbing system causes the issue, you may have to call a plumber to fix it.
#3. No Water from the Faucet
Nothing can be more annoying than turning on your water pipe, and nothing comes out of the faucet. The reason is mostly blockages in your water pipes or shower faucet.
Households using hard water and have older faucet fixtures are likely to have mineral deposits in the faucet. However, even new fixtures can still collect dirt and block water from flowing.
Such cases usually require a professional plumber, although you can do it yourself. However, before you get into the plumbing, first check whether the shutoff valve is operating as it should. Ensure that it is fully open as it might be closed by accident.
If the fixture is the problem, you have to take it out, clean all the valves and chambers, then fix it. It’s always best to call a plumber to ensure proper reinstallation of these parts. Otherwise, if everything is not correctly fixed, your faucet may not work properly.
#4. Tarnishing of Shower Faucet
When you don’t use your faucet for a long time, some parts or the entire faucet can start tarnishing. Your faucet’s functionality and water quality are significantly affected when this happens. The best solution is to check and replace the tarnished parts like the sprout or hose. If it’s the whole faucet, you may have to invest in a new one.
#5. Faucet Noise
A noisy shower faucet can be a nuisance. It usually occurs due to faults in different parts. When you hear noises from your faucet, it could mean that your water supply system is vibrating. A faulty, worn-out, or loose washer is usually to blame.
However, it may be problems with your gasket check valve, seal, or cartridge. Such issues can cause vibrating, hammering, humming, banging, or knocking noises. You’ll have to troubleshoot your water supply system and faucet to know which part is to blame for the noise.
Shower faucet problems are common. Thankfully, you can fix most of them yourself without needing a plumber. However, if a problem is serious or you don’t trust your skills, seek help from a professional to avoid worsening it.
Hi, I’m Brittany. Let’s talk about our hopes, dreams and ideas for our world. Let’s talk travel, because this Earth is a beautiful place to explore. Let’s dish on design, DIY projects and organization for our homes. Let’s celebrate living, loving, learning and laughing.